Ford Modular Performance
Ford Modular Performance Water Pump A great addition to PRP water line are these sleek electric water pumps made to work with a Ford modular engine. These pumps will fit all 4.6 and 5.4 liter late model Ford engines. CNC machined from billet aluminum and assembled with a heavy duty electric motor that will free flow 50 GPM. These pumps are also available with an option idler pulley so you can still run your stock accessories. Two types of idlers available, stock, and underdrive. Click Here For Installation Instructions for Ford Modular Performance Details: Made out of 6061 billet aluminum
Front Motor Plates
Front Motor Plates PRP front motor plates are made out of ¼” thick 6061-T6 billet aluminum and are precision machined so they will fit each application with ease. All plates are made from a one piece design which allows for extra strength to help eliminate engine movement. The perfect addition for quick and easy engine swaps. Browse our other Chassis and Suspension products here Details: Made out of ¼” thick 6061-T6 billet aluminum Precision Machined One piece design which allows for extra strength Engine Block Type: Small Block Chevy, Big Block Chevy Made In USA
Fuel Cell Gaskets
Fuel Cell Gaskets PRP's Rubber Fuel Cell Flange Gasket are custom designed to match our Fuel Cell 6 bolt and 12 bung patterns. Gaskets are an important component for a fuel cell, it works as a sealing agent for the fuel cell assembly to prevent leaks and to maximize the high possible efficiency. Gaskets provide correct compression and act as a barrier for potential fuel leaks. Browse our other Chassis and Suspension products. Details: Custom made to match PRP's 12 bolt and 6 Bolt Fuel Cell Bungs Made from rubber Track tested, Racer Approved Note: PRP Fuel Cell Caps do
Fuel Pressure Regulator Mounting Brackets
Fuel Pressure Regulator Mounting Brackets PRP has done it again with our billet fuel regulator brackets. These brackets are made from 6061-T6 billet aluminum and will tightly secure several different style regulators. All brackets have a direct fit bolt pattern drilled to accept PRP,Holley/Quickfuel, Magna Fuel, Aeromotive and Mallory regulators. The kit comes complete with stainless steel button head bolts and small aluminum spacers for easy installation. These brackets are available in four different finishes: clear, red, blue, or black anodized. Click Here For Installation Instructions for Fuel Pressure Regulator Mounting Brackets Details: Made from 6061 aluminum Anodized for corrosion
Fuel Pressure Regulators
Fuel Pressure Regulators PRP's Billet fuel pressure regulators are the answer when good fuel control is needed at the carburetor. Each unit is constructed as a 2-port design and is fully adjustable. Available with 3/8" NPT, 1/2" NPT, or 10AN inlets, and outlet ports including 3/8" NPT, or 8AN. The front of the regulator includes two 1/8" NPT accessory ports. Each regulator is available with or without an additional return port. Regulators are machined from 6061-T6 aluminum and anodized for corrosion protection. Fully assembled with stainless steel hardware and optional billet mounting brackets are also available. Details: Fully Adjustable Two
Fuel Pump Block-off Plates
Fuel Pump Block-off Plates Each of our fuel pump block-off plates is machined from 6061-T6 billet aluminum and is available in four different anodized finishes: clear, red, blue, or black. Included with each plate are counter-sunk stainless steel button head bolts, along with a gasket for positive sealing. Philadelphia Racing Products strives to bring the best parts to the racing industry. All of our parts are designed in house in Philadelphia and machined on site to ensure quality. All of our parts are Track Tested, Racer Approved and 100% American Made. Browse our other Engine Accessories here. Details: Machined from
Gen IV LS/Gen V LT DOD Delete Oil Block Off Plugs
Eliminate unwanted Active Fuel Management (DOD/AFM) in your Gen IV or Gen V engine with our precision plug kits. Each set includes 8 plugs, CNC-machined from durable 6061 billet aluminum for a perfect fit and long-lasting performance. Designed for reliability, these kits make disabling DOD simple and effective.
Gen V LT AFM Delete & Valley Tray Kit
Gen V LT AFM Delete & Valley Tray Kit Another great addition to the PRP product line are these Gen V valley trays designed to fit your LT engine. These kits come as a complete AFM delete. Each kit comes complete with all necessary fittings and hardware. All plates have a black anodized finish for a great look and corrosion protection. Philadelphia Racing Products strives to bring the best parts to the racing industry. All of our parts are designed in house in Philadelphia and machined on site to ensure quality. All of our parts are Track Tested, Racer Approved
Header Tether
Header Tether PRP’s Header Tether is made from 1/8” stainless steel. Available in 2 sizes, 12”, and 18” lengths. Our tether work best if combined with our Primary Tube Clamp Kit, Collector Tube Clamp Kit, and optional Tether Bracket. PRP’s unique tether kit is the answer to securing any removable collector. (Accepted By: NHRA, IHRA, NMCA, NMRA, PSCA) Philadelphia Racing Products strives to bring the best parts to the racing industry. All of our parts are designed in house in Philadelphia and machined on site to ensure quality. All of our parts are Track Tested, Racer Approved and 100% American
Hoosier Jr. Front Tires and Accessories
Finish your front wheel setup with the perfect match. To complement our high-quality Jr. Dragster Billet Front Wheels, we offer rubber tubes and Hoosier Jr. Dragster tires (16" x 1.5") to complete the package. Designed for performance and style, these components get you race-ready from the start line to the finish line.
Import Electric Water Pumps
Built for serious performance, our import electric water pumps are designed to keep your engine running cool under any conditions. Each pump is precision-machined from billet 6061 aircraft-grade aluminum and finished with a black anodized coating for durability and corrosion protection. Featuring high-output 50GPM motors and aggressive impellers, these pumps deliver superior flow compared to most factory or aftermarket options. Installation is simple with the included wiring harness and instructions, ensuring you get maximum performance with minimal hassle. Available fitments include: Nissan: 4.8L or 5.6L engines Toyota: 4.5L engines Whether you’re building for the track or demanding reliable cooling on
Inline Fuel Filters
Inline Fuel Filters PRP’s new inline fuel filters are the answer to protecting that fuel system and engine from harmful debris. Pump filters are equipped with a cleanable 100 micron wire mesh filter. Carb filters are equipped with a cleanable 40 micron wire mesh filter. Each filter housing has two removable ends for easy assembly and cleaning. Constructed from 6061 billet aluminum and black anodized. Designed for street or race, and available with either a 3/8 barb, 6AN, or 8AN hose ends Check out more Carburetor Accessories here Details: 6061 billet Aluminum / Black Anodized Pump filters have
Inline Fuel Filters Mounting Bracket
Inline Fuel Filters Mounting Bracket PRP's Inline Fuel Filter Mounting Bracket works with our Inline Fuel Filters. Brackets are made from 6061 Billet aluminum and are anodized black for corrosion protection. Details: 6061 billet Aluminum Black Anodized Works with our Inline Fuel Filters Philadelphia Racing Products strives to bring the best parts to the racing industry. All of our parts are designed in house in Philadelphia and machined on site to ensure quality. All of our parts are Track Tested, Racer Approved and 100% American Made. Check out more Carburetor Accessories here
Inline Thermostat Housing
Inline Thermostat Housing PRP's new Inline Thermostat Housing provides an easy way to add a remote thermostat. Works with most GM style thermostats, and will fit any 1-1/2” upper radiator hose. You can use this assembly to install a thermostat inline in your upper radiator hose. Made from billet 6061-T6 aluminum and finished with an anodized finish in either clear or black. Kit includes stainless steel hardware and re-usable thermostat gasket that has an easy to use design. Browse our other Cooling Products here Details: Easy way to add a remote thermostat Works with most GM style thermostats will fit
Intercooler Plumbing Kits
Intercooler Plumbing Kits PRP’s new intercooler plumbing kit is the answer for any turbo application. This kit was designed to solve your water to air intercooler headaches in one package. This kit includes all top of the line products that are black anodized for a long-lasting great look and corrosion protection. Kit comes complete with 5.5 Gallon water tank, billet inline water pump, billet mounting brackets, extra-large billet fill cap, two ½” NPT female bungs, ¼” NPT drain, and all necessary fittings and hose. Browse our other Turbo and Supercharger products here. Details: Designed to solve your water to air
JR Dragster Fuel Cell
Jr. Dragster Fuel Cell With PRP stepping into the Jr dragster world of parts, we found it fitting to produce a product that we know all too well. With these aluminum fuel cells which are made of a billet construction. Each tank features one of our unique fill caps that is O-ring sealed for a tight fit. These tanks feature a larger capacity over the plastic cells so re-filling is less frequent. Details: Machined from billet aluminum Equipped with two mounting bungs O-ring sealed Available in raw or black anodized finish
Jr. Dragster Aluminum Breather Tanks
The Jr. Dragster Aluminum Breather Tank is machined from billet aluminum and assembled and welded to a clean finish. Each tank kit includes two NPT female bungs, breather, and drain cock. Details: Machined from solid 6061 aluminum Available in 2 colors Made in USA
Jr. Dragster Billet Front Wheels
Jr. Dragster Billet Front Wheels Matching the design of our greatest-selling wheelie bar wheels, PRP’s Jr. Dragster Billet front wheels are perfect for any combination. This product is only for one wheel. Please purchase an additional wheel if you would like a set. Details: Machined from solid 6061 aluminum 13" in diameter Will work with any 16" tire, like our very own Hoosier Jr. Front Tires and Accessories Available in 2 colors Made in USA
Jr. Dragster Billet Steering Wheels
Jr. Dragster Billet Steering Wheels Matching the design of our greatest selling wheelie bar wheels, PRP’s Jr. Dragster Billet front wheels are perfect for any combination. Details: Machined from solid 6061 aluminum Available in black finish Made in USA
Jr. Dragster Butterfly Steering Wheels
Jr. Dragster Butterfly Steering Wheels PRP has developed its own design of billet steering wheels for the Jr. dragsters. Both the steering wheel and grips are machined from solid 6061 aluminum. All components are anodized for corrosion protection and available in multiple colors. All wheels are clear anodized and the grips are available in multiple colors to suite your liking. You have the option of: polished, red, blue, black and purple. For personalization we will email you after item is purchased for graphic details. Details: Machined from solid 6061 aluminum anodized for corrosion protection Grips are available in 5 colors
Jr. Dragster Quick-Change Replacement Plates
Keep your restrictor plate setup race-ready with our high-quality replacement options. Each plate is CNC-machined from billet aluminum for a precise fit, durability, and consistent airflow control. Whether you need a single plate or a complete kit, we’ve got you covered. Available options: Single Replacement Plates – Swap out any worn or damaged plate with ease. Precision Kit – Includes half-size plates for fine-tuning your airflow and dialing in performance. Stock Kit – A full set of the original plates that came with your restrictor plate kit. Hardware Replacement – Complete hardware kit (fits both 33mm and 42mm plates). Designed
Jr. Dragster Quick-Change Restrictor Plate Kits
Bracket racing demands flexibility, and weight or throttle stops aren’t always the most consistent solution. That’s where our Quick-Change Restrictor Plates come in. Each plate is CNC-machined from billet aluminum for strength, precision, and durability. Designed to bolt directly behind the carburetor, they can be quickly slid in or out as needed, giving you instant control over airflow and engine performance. Use them only when necessary, and dial in your setup with confidence. Need help installing? We provide step-by-step instructions to make setup easy Need replacements? Check out our Jr. Dragster Quick-Change Replacement Plates.
Jr. Dragster Rear Sprockets
Each sprocket is crafted from 6061 aircraft-grade billet aluminum and CNC precision-machined to ensure a perfect fit and consistent performance. Designed to run with a 415-style chain, these sprockets are available in a wide range of sizes from 63 to 78 teeth, giving you the flexibility to dial in your ideal gearing setup. Designed to work seamlessly with our Jr. Dragster Rear Wheel Hubs for maximum reliability and performance.
Jr. Dragster Rear Wheel Hubs
Upgrade your setup with our CNC-machined billet aluminum wheel hubs, designed with a 3-bolt keyway for maximum strength and reliability. Engineered to work with all axle styles, these hubs deliver a precision fit and long-lasting durability. Pair these hubs with our Jr. Dragster Rear Sprockets for a complete, race-ready drivetrain solution.
Jr. Dragster Rear Wheels
Built for strength, stability, and performance, our 8x8 wheels are spun from 6061 aircraft-grade aluminum and engineered with machined inner wheel slots for a lightweight yet rigid design. Each wheel is held to tight wall-thickness tolerances, delivering the stability racers demand. For added security, wheels are available with single beadlocks. Each beadlock ring is CNC-machined from a solid piece of 6061 billet aluminum and finished at 3/8" thick to minimize distortion and flex under load. Every beadlock design is completed with hardened ARP hardware for long-lasting reliability. Choose your finish: a sleek black anodized coating or a polished aluminum look